ATV & Side-by-Side Service Information

ATV & Side-by-Side Periodic Maintenance

Your Yamaha ATV or Side-By-Side is built to perform — and with proper care, it will deliver that same power and reliability for years to come. Our Periodic Maintenance Service is designed to keep your vehicle running like new, protecting your investment and ensuring you’re ready for every ride.

At our dealership, your machine is serviced by factory-trained Yamaha technicians who know your vehicle inside and out. We use only genuine Yamaha parts and fluids, following the manufacturer’s recommended maintenance schedule to keep performance at its best and prevent costly issues down the road.

Whether you’re out on the trails, on the farm, or at work, regular servicing gives you the confidence that your Yamaha is operating safely, efficiently, and exactly as it was engineered to. Schedule your next maintenance visit today and experience the difference of professional Yamaha care.

Initial 20 Hour Service

  • Spark plug – Check condition and clean, regap, or replace if necessary.
  • Valves – Check valve clearance and adjust if necessary.
  • Air filter element – Clean and replace if necessary.
  • Sub air filter element – Clean and replace if necessary.
  • Front brake – Check operation and correct if necessary – Check fluid level and ATV for fluid leakage, and correct if necessary – Replace brake pads if necessary.
  • Rear brake – Check operation and correct if necessary – Check brake lever and pedal free play, and adjust if necessary – Check brake friction plate wear and replace if necessary.
  • Wheels – Check runout and for damage, and replace if necessary.
  • Tires – Check tread depth and for damage, and replace if necessary – Check air pressure and balance, and correct if necessary.
  • Wheel hub bearings – Check for looseness or damage, and replace if necessary.
  • V-belt – Check for wear, cracks or other damage, and replace if necessary.
  • Chassis fasteners – Make sure that all nuts, bolts, and screws are properly tightened.
  • Steering system – Check operation and repair or replace if damaged – Check toe-in and adjust if necessary.
  • Axle boots – Check for cracks or other damage, and replace if necessary.
  • Engine oil – Change – Check ATV for oil leakage, and correct if necessary.
  • Engine oil filter cartridge – Replace.
  • Engine oil strainer – Clean.
  • Differential gear oil – Change – Check ATV for oil leakage, and correct if necessary.
  • Final gear oil – Change – Check ATV for oil leakage, and correct if necessary.
  • Cooling system – Check coolant level and ATV for coolant leakage, and correct if necessary.
  • Throttle lever – Check operation – Check throttle lever free play, and adjust if necessary – Lubricate cable and lever housing.
  • Front and rear brake switches – Check operation and correct if necessary.
  • Lights and switches – Check operation and correct if necessary – Adjust headlight beams.

Initial 3 Month Service / 800 Miles / 80 Hours

  • Spark plug – Check condition and clean, regap, or replace if necessary.
  • Valves – Check valve clearance and adjust if necessary.
  • Air filter element – Clean and replace if necessary.
  • Sub air filter element – Clean and replace if necessary.
  • Front brake – Check operation and correct if necessary – Check fluid level and ATV for fluid leakage, and correct if necessary.
  • Rear brake – Check operation and correct if necessary – Check brake lever and pedal free play, and adjust if necessary.
  • Brake hoses – Check for cracks or other damage, and replace if necessary.
  • Chassis fasteners – Make sure that all nuts, bolts, and screws are properly tightened.
  • Steering system – Check operation and repair or replace if damaged – Check toe-in and adjust if necessary.
  • Axle boots – Check for cracks or other damage, and replace if necessary.
  • Cooling system – Check coolant level and ATV for coolant leakage, and correct if necessary.
  • Moving parts and cables – Lubricate.
  • Throttle lever – Check operation – Check throttle lever free play, and adjust if necessary – Lubricate cable and lever housing.
  • Front and rear brake switches – Check operation and correct if necessary.
  • Lights and switches – Check operation and correct if necessary – Adjust headlight beams.

Every 6 Months / 1600 Miles / 160 Hours

  • Fuel line – Check fuel hoses for cracks or other damage, and re- place if necessary.
  • Spark plug – Check condition and clean, regap, or replace if necessary.
  • Valves – Check valve clearance and adjust if necessary.
  • Crankcase breather system – Check breather hose for cracks or other damage, and replace if necessary.
  • Exhaust system – Check for leakage and replace gasket(s) if necessary – Check for looseness and tighten all screw clamps and joints if necessary.
  • Spark arrester – Clean.
  • Air induction system – Check the air cut-off valve, reed valve, and hose for damage – Check condition and clean or replace if necessary.
  • Air filter element – Clean and replace if necessary.
  • Sub air filter element – Clean and replace if necessary.
  • Front brake – Check operation and correct if necessary – Check fluid level and ATV for fluid leakage, and correct if necessary – Replace brake pads if necessary
  • Rear brake – Check operation and correct if necessary – Check brake lever and pedal free play, and adjust if necessary – Check brake friction plate wear and replace if necessary.
  • Brake hoses – Check for cracks or other damage, and replace if necessary.
  • Wheels – Check runout and for damage, and replace if necessary.
  • Tires – Check tread depth and for damage, and replace if necessary – Check air pressure and balance, and correct if necessary.
  • Wheel hub bearings – Check for looseness or damage, and replace if necessary.
  • V-belt – Check for wear, cracks or other damage, and replace if necessary.
  • Drive shaft universal joint – Lubricate with lithium-soap-based grease.
  • Chassis fasteners – Make sure that all nuts, bolts, and screws are properly tightened.
  • Shock absorber assemblies – Check operation and correct if necessary – Check for oil leakage and replace if necessary.
  • Stabilizer bushes – Check for cracks or other damage, and replace if necessary.
  • Rear knuckle pivots – Lubricate with lithium-soap-based grease.
  • Steering shaft – Lubricate with lithium-soap-based grease.
  • Steering system – Check operation and repair or replace if damaged – Check toe-in and adjust if necessary.
  • Engine mount – Check for cracks or other damage, and replace if necessary.
  • Axle boots – Check for cracks or other damage, and replace if necessary.
  • Engine oil – Change – Check ATV for oil leakage, and correct if necessary.
  • Engine oil filter cartridge – Replace
  • Engine oil strainer – Clean
  • Final gear oil – Change – Check ATV for oil leakage, and correct if necessary.
  • Cooling system – Check coolant level and ATV for coolant leakage, and correct if necessary.
  • Moving parts and cables – Lubricate
  • Throttle lever – Check operation – Check throttle lever free play, and adjust if necessary – Lubricate cable and lever housing.
  • Front and rear brake switches – Check operation and correct if necessary.
  • Lights and switches – Check operation and correct if necessary – Adjust headlight beams.

Every 12 Months / 3200 Miles / 320 Hours

  • Fuel line – Check fuel hoses for cracks or other damage, and re- place if necessary.
  • Spark plug – Check condition and clean, regap, or replace if necessary.
  • Valves – Check valve clearance and adjust if necessary.
  • Crankcase breather system – Check breather hose for cracks or other damage, and replace if necessary.
  • Exhaust system – Check for leakage and replace gasket(s) if necessary – Check for looseness and tighten all screw clamps and joints if necessary.
  • Spark arrester – Clean.
  • Air induction system – Check the air cut-off valve, reed valve, and hose for damage – Check condition and clean or replace if necessary.
  • Air filter element – Clean and replace if necessary.
  • Sub air filter element – Clean and replace if necessary.
  • Front brake – Check operation and correct if necessary – Check fluid level and ATV for fluid leakage, and correct if necessary – Replace brake pads.
  • Rear brake – Check operation and correct if necessary – Check brake lever and pedal free play, and adjust if necessary – Check brake friction plate wear and replace if necessary.
  • Brake hoses – Check for cracks or other damage, and replace if necessary – Replace.
  • Brake fluid – Change.
  • Wheels – Check runout and for damage, and replace if necessary.
  • Tires – Check tread depth and for damage, and replace if necessary – Check air pressure and balance, and correct if necessary
  • Wheel hub bearings – Check for looseness or damage, and replace if necessary.
  • V-belt – Check for wear, cracks or other damage, and replace if necessary.
  • Drive shaft universal joint – Lubricate with lithium-soap-based grease.
  • Chassis fasteners – Make sure that all nuts, bolts, and screws are properly tightened.
  • Shock absorber assemblies – Check operation and correct if necessary – Check for oil leakage and replace if necessary.
  • Stabilizer bushes – Check for cracks or other damage, and replace if necessary.
  • Rear knuckle pivots – Lubricate with lithium-soap-based grease.
  • Steering shaft – Lubricate with lithium-soap-based grease.
  • Steering system – Check operation and repair or replace if damaged – Check toe-in and adjust if necessary.
  • Engine mount – Check for cracks or other damage, and replace if necessary.
  • Axle boots – Check for cracks or other damage, and replace if necessary.
  • Engine oil – Change – Check ATV for oil leakage, and correct if necessary.
  • Engine oil filter cartridge – Replace.
  • Engine oil strainer – Clean.
  • Differential gear oil – Change – Check ATV for oil leakage, and correct if necessary.
  • Final gear oil – Change – Check ATV for oil leakage, and correct if necessary.
  • Cooling system – Check coolant level and ATV for coolant leakage, and correct if necessary.
  • Moving parts and cables – Lubricate.
  • Throttle lever – Check operation – Check throttle lever free play, and adjust if necessary – Lubricate cable and lever housing.
  • Front and rear brake switches – Check operation and correct if necessary
  • Lights and switches – Check operation and correct if necessary – Adjust headlight beams.


Pricing

Please give Dealer Demo a call on or contact us using our online form to receive a quote on our service costs.

To top